Posted on 2 Comments

Update of the “La Pavoni” kit of BPlus

A few months ago I told you in this article about the different accessories that exist for La Pavoni coffee machines. Quickly, I explained the advantage there is by taking accessories (tamper and “coffee distributor”) with a diameter of 51.5 mm instead of 51mm (more easily found on the market). I recently learned that BPlus, (a partner company of “La Pavoni“) has some of its products update. That’s what I’m going to talk to you about today.

Continue reading Update of the “La Pavoni” kit of BPlus

Posted on 16 Comments

La Pavoni lever machine – regular maintenance

La Pavoni coffee machines are extremely durable. They have a very good design, but like any machine, you have to maintain it. I had already talked a little about it in this article, when I started with my La Pavoni. Today I will complete my information of the time focusing on the maintenance of the boiler and pistons. It is recommended to perform this maintenance from time to time (approximately every 6 months). This is something that will increase the longevity of your La Pavoni coffee machine.

For the writing of this article, I used my personal experience as well as the video (below, at the end of the article) posted on the Youtube channel of the brand. We will discover how to dismantle the entire machine, how to clean it, and how to remount it.

Continue reading La Pavoni lever machine – regular maintenance
Posted on Leave a comment

The best scales for coffee

Weighing our coffee, whatever the extraction, is important to have a good reproducibility. Some use measuring spoons but when you move into the world of coffee, you end up investing in a small scale.

Personally I recommend a scale that has a forecast of 0.01g. There is something for every budget. Here is my selection:

Continue reading The best scales for coffee

Posted on 19 Comments

List of premium hand coffee grinders

Several reasons push me to prefer manual mills to electric mills. They are less noisy, have precision mechanical side that I like, waste less coffee (with less retention). At the time I sought to acquire a coffee grinder, I started listing all the premiums manual coffee grinders on the market. This is the purpose of this article.

Continue reading List of premium hand coffee grinders
Posted on 11 Comments

Review and test : Lelit 41 TEM PID

Recently passionate about the world of coffee, I decided to take my first steps with a manual espresso machine. I automatically excluded any automatic machine because, precisely, it does everything alone and that my only participation in the ritual of coffee preparation is to press a button.

Limited by my budget and after many readings, I compared, weighed and filtered the information to extract a Lelit 41 TEM PID.

According to the description, it seems to correspond to my wishes. What is it really?

Continue reading Review and test : Lelit 41 TEM PID
Posted on Leave a comment

Eureka Mignon review

Do you like coffee and you’re in a hurry in the morning? Do you have people at home or you do not want to waste time grinding coffee by hand? So like me, you probably thought about acquiring an electric coffee grinder.

Like hand coffee grinders, there are many models, all prices and different qualities. Some of the electric coffee grinders will have applications for espresso coffee, others for coffee filters. I was looking for a discreet, pretty coffee grinder, with low coffee retention at an affordable price. The coffee grinder I was looking for must marry well with my machines: a La Pavoni and a Lelit 41TEM.

After investigation, a name often appeared: Eureka Mignon.

Continue reading Eureka Mignon review
Posted on 61 Comments

Apollo vs Kinu M47: A user feedback on the Apollo

As you know, grinding your coffee is essential for making a good espresso. I started with a Porlex that I later replaced with the Kinu M47 (which I did the review here). Then I decided to replace Kinu M47 with the latest high quality manual coffee grinder: the “Apollo coffee grinder” (manufactured by BPlus, with the appreciation and permission of La Pavoni). Why ? because the coffee grinder Apollo solves some problems that displeased me, after a longue use, with the Kinu M47.

Let’s see the technical characteristics of the Apollo mill

Detail of the conical grinding burrs of the Apollo coffee grinder (48 mm, Italmill brand with Nanotech Coating)

It is made entirely of metal: the body of the mill is in CNC anodized Aluminum, everything inside is stainless steel, the only rubber element is a non-slip placed under the base. The 48 mm conical burrs are manufactured by the italian Italmill (Nanotech Coating).

Burrs are standard stock by Italmill. It will be easy to replace if needed and are guaranteed for 100k shots.
The mill is available in three colors: gold champagne, silver and matt black. It has a total weight of 1030g and grinds up to 25g of coffee beans.

According to my tests, I grind 13g of coffee in 40 cranks. That is to say that I put between 15 and 20 seconds to grind the coffee necessary for an espresso.

For a coffee grinder of this category, it has a rather attractive price : 222 €. It was delivered to me in a week and I did not have any customs fees.

The design

Design is important for me. Expensive products that, in addition to grinding the coffee, must give a certain pleasure to look at and using them.

Apollo : retro et modern at time

The Apollo coffee grinder is available in three colors: matt black, gray and gold.

It really looks like the columns of the “Basilica Santissima Annunziata del Vastato”, a monument in the style “Mannerism” that is in Italy. This design seems to honor the Italian origins of the burrs brand. In addition, this shape greatly improves the grip of the coffee grinder during use.

The care of

Since the body of the mill is cylindrical, when grinding coffee, it must be able to hold it should prevent turning on itself.

Almost all the coffee grinders on the market are simple smooth rolls. This is binding: you have to squeeze very hard to prevent them from slipping. I had the expense with my first manual mill: the Porlex.

For instance, the Kinu M47 has been designed with a small wedge for the thumb to avoid the rotation of the mill. After several months of use I can say that this approach is not optimal because it requires always the same finger (thumb) to hold it firmly to prevent it slips. To be really effective, it would be necessary to be able to block the mill with all the fingers.

The “thumb wedge” present on the Kinu M47. After 7 months of use at 3 coffees a day, I have the impression that the thumb rest is starting to come off. There is no play but I’m starting to see a small gap (visible in the photo)

Apollo coffee grinder body. Slightly larger diameter than the Kinu M47, it is easier to handle and maintain.

For the Apollo coffee grinder, with its “honeycomb” shape (which is an integral part of the design), the palm of the hand and the fingers adhere perfectly to the mill. It is not necessary to squeeze very hard, which makes it more pleasant to use.

The handle

By its shape I think we better hold the handle of the Apollo than the Kinu M47. As you can see in the photos, it is bigger and rounder. When I use a coffee grinder, I always place the palm of my hand on the top of the handle. The crank Kinu is a little narrower and does not have the roundness of the palm of the hand when it is tightened.

The Kinu handle is not unpleasant, but it is less comfortable than the Apollo coffee grinder.

Other generalities of design

Exist two categories of manual coffee grinders. It’s distinguished by the number of steps necessary to prepare the grinder:

  • The mills you need:
    • open a lid
    • pour the coffee inside
    • replace the lid
    • look for the crank that we often lose (believe it, there is some experience with my Porlex mill)
    • place the crank
    • grind the coffee


  • The mills you need:
    • pour the coffee inside and grind the coffee

To my knowledge, there are only two mills that meet the second category: the kinu M47 and the Apollo.

In my opinion, there is one detail that has been better thought of with the Apollo coffee grinder. It has an angle of attack of the funnel which is more pronounced compared to that of Kinu M47. During daily use, this detail is not anecdotal and is important because, it allows you to pour the coffee at once without grains bouncing on the edges (of the funnel) and end up on the ground. In addition, the opening of the cylinder is a little more important at the Apollo mill reducing the chances of loss of coffee.

Setting the fineness of the grind

The setting of the grind of the Apollo and Kinu M47 is not stepless but is done click by click. Like many grinders that work by this mechanism, it is very very accurate (see below for more details).

Although visually similar, the mechanisms of Kinu M47 and Apollo are totally different.

On the Apollo coffee grinder it is possible to turn the adjustment wheel without having to loosen the screw that holds the crank (of course, the adjustment knob does not jump when using the grinder). This is not possible with the Kinu M47: you must loosen the screw first (which holds the crank) and then adjust the coffee grinder coarseness.

More, on the Apollo, it is not necessary to tighten very much the screw that holds the set. The setting will never jump.

By cons with the Kinu M47, I often had the bad surprise to see my setting jump one or two notches when using it.

Elements of the mechanics for the Kinu M47 and the Apollo. These are the elements that keep the crank in place and adjust the grain of the grind.

The container fixing system

The container of the Apollo coffee grinder is screwed while that of Kinu M47 is fixed with magnets. Both systems are effective. Personally I have a small preference for the magnetic fastening system even if the screw system may look much stronger over time.

A gauche le conteneur Kinu M47 avec 4 aimants et à droite l’Apollo avec son système à visse

Detail of the containers: on the left the centenary of the Kinu M47 with its 4 magnets and on the right the Apollo with its screw system

Problems observed in some Kinu M47 users. Source Source

You will notice in passing that the base of the Apollo coffee grinder is wider than the Kinu M47. This accentuates its foundation.

Disassemble the Apollo

The Apollo mill has a great advantage over its competitor: it can be disassembled entirely and reassembled without losing the settings. The complete cleaning will be all the easier.

Although complete disassembly of Kinu M47 is possible, it is strongly discouraged.

First step in dismantling the Kinu M47: unscrewing the central axis
Kinu M47 components can be disassembled without a hammer
The operator begins to dismantle the Kinu M47 with a hammer. it hit the grinding wheel and one of the two ball bearings
In this photo, we can see that the operator is reassembling the mill. To fix the wheel, he is obliged to give small blows of hammers

As you can see, you have to go with hammers, at the risk of damaging the coffee grinder. Moreover, when reassembling it is impossible to find the initial setting. Here we go again on several tests to find the good fineness of the grind.

The maker of Kinu M47 says on his site that his grinder can be disassembled without tools in 1 minute. The only problem is that we do not disassemble the entire mill (we remove only the central rod does not allow access to the inside of the coffee grinder for cleaning).

With the Apollo coffee grinder, after removing the central rod, we dismantle all the remaining parts by removing two small screws. We can then remove the second part of the wheel and one of the two ball bearings. As a result, it is very easy to clean the interior of the mill and reassemble it, without loss of adjustment.

Ball bearing detail. It is very large and locks into the cylinder by pushing it in using a hydraulic press or by hitting it with a hammer.

Kinu M47 coffee grinder completely disassembled

The cleaning of the coffee grinder

With the Apollo coffee grinder, after removing the central rod, we disassemble the rest by removing two small screws. We can then remove the second part of the grinding wheel as well as one of the two ball bearings. As a result, it is very easy to clean the inside of the grinder and then reassemble it, without losing adjustment.

To disassemble the Apollo, the operator begins by removing the central rod.
Then he unscrews two screws. this will give him access to the rest of the mill.
He removes the millstone
Then roll it with a ball. Access to the inside of the mill is completely free allowing cleaning. After reassembling it, we do not lose our settings.
If we follow the recommendations not to disassemble the Kinu M47 with a hammer, it will be impossible to clean the interior as you can see in this photo
Cleaning the Apollo coffee grinder is easy.

As you can see in the photos, it is much easier to clean the interior of the Apollo grinder because it is removable.

Time spent grinding

This is a recurring question for anyone looking to buy a manual coffee grinder: “How long will I spend grinding coffee?” – “I want it to be fast.”

This is a recurring question for anyone looking to buy a manual coffee grinder: “How long will I spend grinding coffee?” – “I want it to be fast.”

To grind 13 grams of coffee with the Apollo coffee grinder, I do about 40 crank turns. That is to say that I put 15 to 20 seconds to grind the coffee (18 seconds on average after being timed 3 times). Note that the setting is a fine molding compatible with an espresso machine.

In the demonstration video of the Apollo coffee grinder, the operator takes about 25 seconds to grind 15 grams of coffee. As I do not keep the mill on the table when I grind by rotating both the coffee grinder body and the crank, I’m a little faster.

The retention of coffee

The retention of coffee is extremely low on manual coffee grinders (compared to electric coffee grinders that can sometimes hold several grams of coffee). Generally I put one or two drops of water in the coffee before grinding it to neutralize the static electricity responsible for the retention.

I observed that coffee tends to stick a little more in the container of Kinu M47. This forces me to kick on the side of the containers to loosen the rest of the coffee. I have the Apollo for less time but I sincerely feel that it is less the case.

Retention of coffee inside the tank on the Apollo

Retention of coffee inside the tank on the Kinu m47

Quality of the grind

In my opinion, the Apollo and the Kinu M47 are quite equivalent in terms of the quality of the grind. They both make excellent espresso (and even use a bottomless filter holder).

En conclusion

The Apollo is a very good coffee grinder. It is beautiful, very functional, with a very good grip, the ability to disassemble fully, easily, finding its settings. It grinds coffee quickly. The defects that I have seen with the Kinu M47, are largely corrected with the Apollo.
In addition it costs less: 222 € against vs 329 € for the Kinu M47. There is therefore a difference of just over 100 € between the two products which is not negligible.

If like me you find it to your taste, do not hesitate.

Posted on 4 Comments

The ecological aberration of capsules (pods) machines

Even before they were marketed, the coffee pods system was already an aberration. Capsules make coffee less good than Italian espresso machines, make coffee more expensive, give less freedom in the choice of coffee and above all, this process is far from ecological.

I propose today to look at what their impacts are, the promises of the companies that market the pods and finally, I propose to you to determine what alternatives to the polluting pods can be.

Continue reading The ecological aberration of capsules (pods) machines